Filter
Top Products
4-11
User Guide for the Cisco Mobile Wireless Transport Manager 6.0
OL-9118-03
Chapter 4 Getting Started
Discovering Your Network
Creating a New Seed File
To create a new seed file in the MWTM, launch the Discovery dialog box, as described in Launching the
Discovery Dialog, page 4-6, then select the Seed Settings tab, if it is not already selected (Figure 4-1).
You use the Seed Settings tab within the Discovery dialog box to create, save, load, and delete MWTM
seed files.
The Seed Settings tab on the Discovery dialog box contains:
Number of Files
(displayed in bottom left corner)
Total number of seed files and folders.
OK Saves the seed file and any changes you made to the seed file list
and closes the dialog box.
To save the seed file with a new name, you can either save the file
with:
• A completely new name. Enter the new name and click OK.
• An existing name, overwriting an old seed file. Select the
name in the list and click OK.
The MWTM:
• Saves the seed file with the new name
• Saves any changes you made to the list of files
• Closes the Save File Dialog: Seed File List dialog
• Returns to the Discovery dialog box
Delete Deletes the selected file from the seed file list. The MWTM issues
an informational message containing the name and location of the
deleted file.
Cancel Closes the dialog box without saving the seed file or saving any
changes to the seed file list.
Help Displays online help for the dialog box.
Field or Button Description
Field or Button Description
Seed Nodes Lists the seed nodes currently defined in the MWTM.
IP Address Range
or Hostname
IP address of the seed node. The default value is *.*.*.*.
Note Follow the guidelines for IP addresses in SNMP Configuration Table,
page 3-16.
Retries Number of times the MWTM attempts to connect to the seed node. The valid
range is 0 to 99. The default value is 2.
Timeout (sec) Time, in seconds, the MWTM waits for a response from the seed node. The valid
range is 0 (no timeout) to 9999. The default value is 1 second.