Filter
Top Products
4-21
User Guide for the Cisco Mobile Wireless Transport Manager 6.0
OL-9118-03
Chapter 4 Getting Started
Discovering Your Network
Verifying Discovery
After you discover the network (see Discovery Overview, page 4-4), examine the Discovered Nodes
table to verify that the MWTM discovered all of the nodes in the network. If you suspect that the MWTM
did not discover all of the nodes, verify that:
• No nodes are excluded from your current view.
• The MWTM server can ping the nodes.
• The nodes are running images that are compatible with the MWTM server.
• SNMP is enabled on the nodes.
• The MWTM is configured with the correct SNMP community name. See Launching the Discovery
Dialog, page 4-6 for details.
Status Reason Reason for the current status of the signaling gateway-mated pair.
For a full list of possible reasons, see the stateReasons.html file. If you installed
the MWTM in:
• The default directory, /opt, then the file is located at
/opt/CSCOsgm/apache/share/htdocs/eventHelp directory.
• A different directory, then the help directory and file reside in that directory.
If the cell is too small to show all of the status reason, place the cursor over the
cell to see the full text in a tooltip.
The status reasons are listed in order of decreasing severity. If two or more
reasons apply, the reason of greatest severity appears.
If the status reason is Unsupported Configuration, correct the configuration and
enter the mwtm cleandiscover command to delete all current network data and
begin a discovery of the network. If the status reason remains Unsupported
Configuration, enter the mwtm clean command to restore the MWTM server to
a state that would exist after a new installation of the MWTM, excluding the log
files, which the MWTM retains. To also remove the log files, enter the mwtm
cleanall command. For more information on the use of these commands, see the
Command Reference, page B-1.
Back Displays the Seed Settings tab in the Discovery dialog box.
Delete Deletes the selected node or nodes from the Discovery database. The MWTM
deletes the nodes without asking for confirmation.
Poll Node Begins a poll of all nodes selected within the Discovered Nodes table in the
Discovery tab.
You cannot poll a node with a Primary SNMP Address of N/A. If you select:
• A node with a Primary SNMP Address of N/A, then the Poll button is
dimmed and cannot be selected.
• More than one node, and even one of them has a Primary SNMP Address of
N/A, then the Poll button is dimmed and cannot be selected.
Column or Button Description