Filter
Top Products
1-6
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-07
Chapter 1 Overview
Network Management
Figure 1-7 Crossover Cable Pinout—PA-2FE-TX RJ-45 Connections Between Hubs and Repeaters
Figure 1-8 shows the duplex SC connector (one required for both transmit and receive), and Figure 1-9
shows the simplex SC connector (two required, one each for transmit and receive) used for PA-2FE-FX
optical-fiber connections. Cisco does not supply these multimode optical-fiber cables; they are available
from a commercial supplier.
Figure 1-8 PA-2FE-FX Duplex SC Connector
Figure 1-9 PA-2FE-FX Simplex SC Connector
Network Management
The PA-2FE supports the following:
• SNMP agent v1 (RFC 1155–1157)
• Ethernet MIB (RFC 1398)
• IEEE 802.3 LAN specification for CSMA/CD
• MIB for Network Management of TCP/IP-Based Internets: MIB-II (RFC 1213)
• Definition of Managed Objects for Bridges (RFC 1493)
• Evolution of Interfaces Group of MIB-II (RFC 1573)
Ethernet port
1 TxD+
2 TxD–
3 RxD+
6 RxD–
1 TxD+
2 TxD–
3 RxD+
6 RxD–
38583
DTE
H2214
H2399