Filter
Top Products
4-5
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-07
Chapter 4 Configuring the PA-2FE
Configuring the Interfaces
Table 4-2 provides examples of the show interfaces fastethernet command for the supported platforms.
Table 4-2 Examples of the show interfaces fastethernet Command for the Supported Platforms
Platform Command Example
Cisco 7120 series routers show interfaces fastethernet,
followed by slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a PA-2FE in port
adapter slot 3.
Router# show interfaces fastethernet 3/0
fastethernet 3/0 is administratively down,
line protocol is down
[Additional display text omitted from this
example]
Cisco 7140 series routers show interfaces fastethernet,
followed by slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a PA-2FE in port
adapter slot 4.
Router# show interfaces fastethernet 4/0
fastethernet 4/0 is administratively down,
line protocol is down
[Additional display text omitted from this
example]
Cisco 7200 series routers and
Cisco 7200 VXR routers
show interfaces fastethernet,
followed by slot/port
(port-adapter-slot-number/
interface-port-number)
For Cisco 7206 router shelves:
show interfaces fastethernet
shelf-number/slot/port
(shelf-number/port-adapter-slot-
number/interface-port-number).
The example is for interface 0 on a PA-2FE in port
adapter slot 6.
Router# show interfaces fastethernet 6/0
fastethernet 6/0 is administratively down,
line protocol is down
[Additional display text omitted from this
example]
Cisco uBR7200 series routers show interfaces fastethernet,
followed by slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a PA-2FE in port
adapter slot 2.
Router# show interfaces fastethernet 2/0
fastethernet 2/0 is administratively down,
line protocol is down
[Additional display text omitted from this
example]
Cisco 7201 router show interfaces fastethernet,
followed by slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a PA-2FE in port
adapter slot 1.
Router# show interfaces fastethernet 1/0
fastethernet 1/0 is administratively down,
line protocol is down
[Additional display text omitted from this
example]