Filter
Top Products
4-3
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-07
Chapter 4 Configuring the PA-2FE
Configuring the Interfaces
Step 3 Shut down interfaces by entering the interface fastethernet command (followed by the interface address
of the interface), and then enter the shutdown command. Table 4-1 shows the command syntax for the
shutdown command for the supported platforms.
When you have finished, press Ctrl-Z—hold down the Control key while you press Z—or enter end or
exit to exit configuration mode and return to the EXEC command interpreter.
Table 4-1 Examples of the shutdown Command for the Supported Platforms
Platform Command Example
Cisco 7120 series routers interface, followed by the type
(fastethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 3.
Router(config)# interface fastethernet 3/0
Router(config-if)# shutdown
Router(config-if)# interface fastethernet 3/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7140 series routers interface, followed by the type
(fastethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 4.
Router(config)# interface fastethernet 4/0
Router(config-if)# shutdown
Router(config-if)# interface fastethernet 4/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7200 series routers and
Cisco 7200 VXR routers
interface, followed by the type
(fastethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 6.
Router(config)# interface fastethernet 6/0
Router(config-if)# shutdown
Router(config-if)# interface fastethernet 6/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco uBR7200 series routers interface, followed by the type
(fastethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 2.
Router(config)# interface fastethernet 2/0
Router(config-if)# shutdown
Router(config-if)# interface fastethernet 2/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7201 router interface, followed by the type
(fastethernet) and slot/port
(port-adapter-slot-number/
interface-port-number)
shutdown
The example is for interface 0 and interface 1 on a
PA-2FE in port adapter slot 1.
Router(config)# interface fastethernet 1/0
Router(config-if)# shutdown
Router(config-if)# interface fastethernet 1/1
Router(config-if)# shutdown
Ctrl-Z
Router#