Filter
Top Products
3-4
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-07
Chapter 3 Removing and Installing Port Adapters
Port Adapter Removal and Installation
Port Adapter Removal and Installation
In this section, the illustrations that follow give step-by-step instructions on how to remove and install
port adapters. This section contains the following illustrations:
• Cisco 7100 Series—Removing and Installing a Port Adapter, page 3-5
• Cisco 7200 Series Routers and Cisco 7200 VXR Routers—Removing and Installing a Port Adapter,
page 3-6
• Cisco uBR7200 Series Routers—Removing a Port Adapter, page 3-7
• Cisco uBR7200 Series Routers—Installing a Port Adapter, page 3-8
• Cisco 7201 Router—Removing and Installing a Port Adapter, page 3-9
• Cisco 7301 Router—Removing and Installing a Port Adapter, page 3-10
• Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter, page 3-11
• Cisco 7401ASR Router—Removing and Installing a Port Adapter, page 3-13
• Cisco 7500 Series Router VIP—Removing and Installing a Port Adapter, page 3-13
Tip If a port adapter lever or other retaining mechanism does not move to the locked position, the port
adapter is not completely seated in the midplane. Carefully pull the port adapter halfway out of the slot,
reinsert it, and move the port adapter lever or other mechanism to the locked position.