Filter
Top Products
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the QoS Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 118
5
• L2TP Passthrough—Layer 2 Tunneling Protocol is the similar to PPP but
allows Layer 2 and the PPP session to terminate at different servers or
locations. L2TP Passthrough is enabled by default. To disable L2TP
Passthrough, select Disabled.
STEP 3 Click Save.
Configuring the QoS Settings
This section describes how to configure the QoS settings of the router:
• Managing Bandwidth on page 119
• Configuring QoS on page 121
• Configuring DSCP on page 122
QoS allows you to perform bandwidth management, by either rate control or
priority. You can also configure the QoS Trust Mode and DSCP settings.