Filter
Top Products
Setting Up and Configuring the WRVS4400N Wireless-N Router
Viewing Status
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 152
5
• Force Version—The default protocol version to use. Select Normal (uses
RSTP) or Compatible (compatible with old STP). The default is Normal.
• Protocol Enable—Check this box to enable RSTP on the associated port.
The default is unchecked (RSTP disabled).
• Edge—Check this box to specify that the associated port is an edge port
(end station). Uncheck the box to specify that the associated port is a link
(bridge) to another STP device. The default is checked (edge port).
• Path Cost—The RSTP path cost for the designated ports. Enter a number
from 1 to 200000000, or auto (autogenerated path cost). The default is
auto.
Viewing Status
The Status window allows you to view the current status on this router:
• Viewing WAN/Gateway Status on page 153
• Viewing Local Network Status on page 155
• Viewing Wireless LAN Status on page 157
• Viewing System Performance on page 158