Filter
Top Products
Chapter 3 Disassembly and Maintenance
3-5. Disassembly, Reassembly and Lubrication
CL-S700/CL-S703/CL-S700R 3-28
2. While tilting the Frame Ribbon L block to the left (outer ward) a little, engage the “SA, Front
Tension Arm” with the “SA, Frame Ribbon R” (arrow 1).
At the same time, hook the “Spring, Guide Shaft FF” on the “SA, Front Tension Arm”. Be sure
that both ends of the spring are correctly hooked as shown in the enlarged illustration.
3. Next, engage the left side of the “SA, Front Tension Arm” with the Frame Ribbon L block (arrow
2).
4. Assemble the Bushing (24400680), “Shaft, Ribbon Guide FF” and Bushing (24400670). For
Bushing (24400670), lock its end by turning it so that the protrusion “A” is seated securely.