Filter
Top Products
Chapter 3 Disassembly and Maintenance
3-5. Disassembly, Reassembly and Lubrication
CL-S700/CL-S703/CL-S700R 3-22
3-5-10. SA, Base Guide Open
(1) Removing the “SA, Base Guide Open”
Note: The “SA, Base Guide Open” can be removed without removing the “Unit, Mechanism”.
1. Open the top cover.
2. Open the head block by pushing the head open lever.
3. Remove 2 screws (PH (SW+PW), M3x5) and detach the “SA, Base Guide Open”. Refer to
the figure shown below.
(2) Disassembling the “SA, Base Guide Open”
1. Remove 2 screws (PH (SW+PW), M3x5) [7-8] and pull out 2 “SA, Damper Shaft” [7-1] on
both sides.
2. Remove the Damper Frame block (Plastic) from the “Frame, Damper” (Metal) [7-2].
3. Remove the “Spring, Damper L” [7-6] and “Spring, Damper R” [7-7], disengage 1 E-ring
(E-Ring, 4) [7-3], and pull out the “Shaft, Damper” [7-4] from the “Frame, Damper” (Plastic)
[7-5].
Note on reassembling:
• Assemble the Damper L Spring [7-6] and “Spring, Damper R” [7-7] referring to above figure.
Spring, Damper L
Spring, Damper R
PH (SW+PW), M3x5
SA, Base Guide Open