Filter
Top Products
Chapter 3 Disassembly and Maintenance
3-5. Disassembly, Reassembly and Lubrication
3-11 CL-S700/CL-S703/CL-S700R
(2) Removing the “Gear, One-way”
1. Remove the “Unit, Roller Platen” referring to above “(1) Removing the “Unit, Roller
Platen””.(1) Removing the “Unit, Roller Platen”(1) Removing the “Unit, Roller Platen”
2. Disengage 1 E-ring (E-Ring, 4) and remove the “Gear, One-way” from the shaft of the “Unit,
Roller Platen”.
Note on reassembling:
• Insert the plastic washer into the projection of the “Gear, One-way” (on the gear part side).
Then, insert the “Gear, One-way” into the shaft of the “Unit, Roller Platen”, while facing the
gear part of the “Gear, One-way” toward the “Unit, Roller Platen”.
Gear, One-way
E-ring, 4
Gear part
E-ring, 4
Gear, One-way
Plastic washer