Filter
Top Products
Chapter 2 Operating Principles
2-3. Operation Panel
CL-S700/CL-S703/CL-S700R 2-38
(2) Hex dump mode
You can print the data in the receive buffer in the hexadecimal form.
For label:
1. While pressing and holding the [STOP] key, turn on the power.
2. Wait until the POWER LED turns on and the LCD indicates “Hex Dump Mode” “Label
Media”, and then release the [STOP] key.
The printer enters hex dump mode and, when print data is sent to the printer, hex dump
printing starts.
To exit from hex dump mode: Turn off the power.
For continuous media:
1. While pressing and holding the [STOP] key, turn on the power.
2. Wait until the POWER LED turns on and the LCD changes from “Hex Dump Mode” “Label
Media” to “Cont. Media”, and then release the [STOP] key.
The printer enters hex dump mode and, when print data is sent to the printer, hex dump
printing starts.
To exit from hex dump mode: Turn off the power.
DUMP LIST
02 40 30 31 30 30 0D 02 60 30 30 32 30 0D 02 4C .M0100..c0020..L
44 31 31 0D 31 30 30 30 30 30 30 30 30 30 31 30 D11.100000000010
30 30 31 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 0010123456789:;<
[Dump list example]