Filter
Top Products
Chapter 3 Disassembly and Maintenance
3-5. Disassembly, Reassembly and Lubrication
CL-S700/CL-S703/CL-S700R 3-26
3-5-12. Unit, Frame Ribbon L
1. Remove the “Unit, Mechanism”.
Refer to “3-5-8. Unit, Mechanism.
2. Remove 1 screw (1PH, M3x6) and detach the “Cover, Ribbon” from the Frame Ribbon L
block.
3. Open the head block by pushing the head open lever and remove 1 screws (2PH (SW+PW),
M3x5).
4. Close the head block and remove 3 screws (3PH (SW+PW), M3x5).
5. On the left side, release the lock of the Bushing (24400670) by turning its end after pushing the
protrusion “A” with tweezers pointing tip, and then detach the Bushing (24400670), “ Shaft,
Ribbon Guide FF”, and the Bushing (24400680).
6. Lift the front side of the Frame Ribbon L block and turn it in the direction shown by the arrow,
and then detach it upwardly.
7. Remove the “Spring, Shaft Guide FF” and “SA, Front Tension Arm” from the “Unit, Mechanism”.
For disassembling parts of the “SA, Front Tension Arm”, refer to “3-5-13. Disassembling the
“SA, Front Tension Arm””.
1
2
3
3
A
Cover, Ribbon
(Frame Ribbon L Block)
Bushing (24400670)
Shaft, Ribbon Guide FF
Bushing (24400680)
SA, Front Tension Arm
Unit, Frame Ribbon L
Spring, Shaft Guide FF