Filter
Top Products
— 30 —
GS b n
[Function] Specifying/canceling the smoothing
[Code] <1D>H<62>H<n>
[Range] 0 n 255
[Outline] This command specifies or cancels the smoothing.
•“n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
[Caution] • Smoothing is effective to printer’s internal characters, download characters, and
non-standard characters.
• Smoothing is not effective to characters with either of their vertical or horizontal
magnification is ×1.
[Default] n = 0
[See Also] ESC !, GS !
n0 Function
0 The smoothing is canceled.
1 The smoothing is specified.