Filter
Top Products
— 86 —
GS c
[Function] Print the counter
[Code] <1D>H<63>H
[Outline] This command prints the serial number counter data.
After setting the current counter value in the print buffer as the print data (character
string), it increments or decrements the counter according to the set count mode.
[Caution] • The format used in setting the value to the print buffer depends on the GS C0
command.
• The count mode is set by the GS C1 or GS C; command. When execution of GS c
command results in excess of the counter final value, the counting returns to the
final value of the counter.
[See Also] GS C0 , GS C1 , GS C2 , GS C ;
[Sample Program]
[Print Results] See the Sample Program and Print Results of the commands related to the counter.