Filter
Top Products
Disassembly
2 - 10 Removing the Hard Disk Drive in Bay Two
2.Disassembly
Removing the Hard Disk Drive in Bay Two
1. Turn the computer OFF, remove the battery (page 2 - 6) and turn it over.
2. Remove screws - (Figure 2 - 5a), then lift the cover off the changeable drive bay and set it aside.
3. Remove screw (Figure 2 - 5b), then gently push the device out of the bay (you may need to use a screwdriver to
do this).
4. Remove screws - (Figure 2 - 5c), and disconnect cable (Figure 2 - 5d), then take the HDD assembly out
of the case.
5. Remove screws - (Figure 2 - 5e) from the HDD assembly (note the disk orientation within the brackets).
Figure 2 - 5
Bay Two HDD
Removal
Sequence
a. Remove the screws
from the changeable
drive bay cover.
b. Remove screw 5 and
push the device out
of the computer.
c. Remove the 4 screws
from the HDD case.
d. Disconnect the cable
and remove the HDD
assembly.
e. Remove the screws
from the assembly
brackets.
4. Drive bay cover
11. Drive case
16. HDD
17. Assembly brackets
•9 Screws
1 3 4
5
6 9
10
12 15
a.
b.
2
1
3
c.
5
d.
89
15
14
6
7
12
13
4
11
16
17
17
e.
10