Filter
Top Products
Chapter 5: Programming commands 131
A776-PG00001 C 12/09 A776 (B780) Programming Guide
DHCP (auto-conguration)
ASCII US BS BS n1
Hexadecimal 1F 08 08 n1
Decimal 31 8 8 n1
n1 = 0: disabled
n1 = 1: enabled
Default: enabled
Enables or disables the use of DHCP at power-up to obtain an IP address. If no address is found within two minutes,
DHCP obtains the default IP address.
Inactivity timeout
ASCII US BS HT n1
Hexadecimal 1F 08 09 n1
Decimal 31 8 9 n1
n1 = 0: disabled
n1 = 1: enabled
Default: enabled
Enables or disables resetting of open TCP ports after ve (5) minutes inactivity.
Keep-alive pings
ASCII US BS LF n1
Hexadecimal 1F 08 0A n1
Decimal 31 8 10 n1
n1 = 0: disabled
n1= 1: enabled
Default: enabled