Filter
Top Products
Chapter 3: Migrating to a new printer
A776-PG00001 C 12/09 A776 (B780) Programming Guide
19
Select Two - Sensor Option for B780
Code (Hexadecimal)
1F 03 25 05 n
This command sets the two-sensor option for the B780 mode. When enabled, two distinct slip sensor statuses are
reported.
n Two-Sensor Option
00 Disable two-sensor option
01 Enable two-sensor option (default)
Select Number of Lines of Validation for B780
Code (Hexadecimal)
1F 03 25 06 n
This command sets the number of lines of validation that can be printed in B780 mode.
n Number of validation lines
00-04 4 (default)
05-0F actual number (5 – 15 decimal)
This corresponds to A721 internal dip switch 3.6 and 3.7.
Select B780 Map User Character Option for B780
Code (Hexadecimal)
1F 03 25 07 n
This command selects the B780 map user characters option. This is available for A721 applications that rely on printing
user-dened characters and have not made the necessary changes for thermal character denitions. If this command
is enabled, then the characters as dened by the Dene User-Dened Character Set command (1B 26 s c1 c2 etc.) will
be modifed by the printer rmware such that they print in an acceptable manner on the thermal receipt station. The
best print quality will be obtained by incorporating User Dened Characters which meet the thermal receipt station
requirements.
n Map user character option
00 Disable (default)
01 Enable
Select Slip Right Margin in Page Mode
Code (Hexadecimal)
1F 03 25 0E n
This command sets the number of lines of validation that can be printed in B780 mode.
n Right margin Number of lines in page mode rotated orientation
00 .1” (B780 default) 17 (not available on A721)
01 .3” 15
02 .5” (A721 default) 15
· This command corresponds to A721 internal dip switch 3.5.
· For Page Mode printing, these are the A721 internal dip switch settings:
3.5 Right Margin Page Mode
O .5”
On .3”
· Default tabs emulate the A721 when A721 margin is congured: default tabs are at 5 dots/column instead of
6 dots/column.