Filter
Top Products
Chapter 5: Programming commands74
A776 (B780) Programming Guide A776-PG00001 C 12/09
Save graphics buer as logo (ColorPOS
®
)
ASCII GS 0x91 n
Hexadecimal 1D 91 n
Decimal 29 145 n
This command will save all the raster data that is in the working graphics buer (where surround graphics are formed)
as a logo with index value n. This logo can then be used repeatedly for inserting dierent text. See the background
logo print command.
There is one working graphics buer in the printer; its size (and that of the saved logo) is of maximum print width size,
and of sucient length to store the largest of the surround graphic styles dened since the last buer “freeze” event.
This command is ignored if the graphics buer is not in a “merge pending” state. The graphics buer state will be set to
“frozen” by this command.
Related information
This command is ignored in page mode.
Background logo print mode (ColorPOS
®
)
ASCII GS 0x92 n
Hexadecimal 1D 92 n
Decimal 29 146 n
This command will place into the graphics buer the logo designated by n. As soon as there is a print action command
(such as text output) the graphics buer will be merged (logical OR process) with print output.
This command sets the graphics buer state to “merge pending”, functioning and performing the save as in the form
and merge real time surround graphics command.
Related information
This command is ignored in page mode.
!