Filter
Top Products
Writer: Beth Snowberger - Saved by: Fleur - Saved date: 08/17/99 1:44 AM
File name: Parrot15_RefGuide_final_0810
Inserting the Memory Module
Press the right end of the module Ì downward until it is fully inserted.
Replace the memory compartment cover, inserting the right end of the
cover first, and tighten the screw.
Turn on the device, by pressing the power button. The opening screen
reports the new memory size.
Follow the instructions on the screen to reconfigure the device.
Tap StartààSettingsààAsset ViewerààMemory to check the memory
size. If it reports the correct memory size, the upgrade has been
successful.
NOTE: If the memory size reported is incorrect, the memory module may
be damaged or it may not have been installed properly. You can try to
correct this problem by uninstalling the memory module then re-installing
the module as described above.
Ë
Ì