Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-9
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Writer:
Chris Seiter
Project:
Installing the Hub
Comments:
299440-001
File Name:
2824_3.DOC
Last Saved On:
6/26/97 11:00 AM
Figure 3-7 shows two 2724 hubs connected via a backplane connector between
the EXPN PORTs. The DIP switches on the 2724 hubs are set with the top hub
as the HOST and the bottom hub as the TARGET.
Figure 3- 7.
Interconnecting Two 2724 Hubs Via a Backplane Connection Cable
In this example, the unmanaged stack consists of the maximum of two 2724
hubs. Either hub in the stack can be the HOST or the TARGET. Both hubs are
in the factory-default MAN mode.