Compaq 2824 Switch User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-19
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Writer:
Chris Seiter
Project:
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Comments:
ile Name:
2824_5.DOC
Last Saved On:
06/25/97 5:32 PM
Parameters Stored in NVRAM
The 2824 hub stores important configuration parameters in non-volatile
memory to allow its configuration to be saved if a power outage occurs. When
the hub is powered up, it restores the saved settings.
System name, location, and contact
Novell Hub MIB repeater and port names
RMON configuration (doesn’t include history buckets or event log)
VT100 configuration, including password
Port enable/disable
Backplane isolated/connected
Backup port configuration
Port Intrusion configuration, including security
Internal 2-port 10/100 switch configuration
IP and SLIP configuration
IP autodiscovery configuration
IPX configuration
IPX autodiscovery configuration
BOOTP configuration
IP and IPX trap receivers
Authentication trap enable/disable
RFC1516/Novell repeater MIB traps selection
RMON table configuration timeout
Modem configuration
SNMP/IP access control, including community strings
SNMP/IPX access control, including community strings
Telnet enable/disable