Compaq 2824 Switch User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-16
Using the VT100 Interface
Writer:
Chris Seiter
Project:
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Comments:
299440-001
File Name:
2824_B.DOC
Last Saved On:
6/23/97 5:26 PM
3. Move the cursor to the Backup Unit entry field. Then enter the number of
the desired backup unit.
4. Move the cursor to the Backup Port entry field. Then enter the number of
the desired backup port.
5. Move the cursor to the State entry field and press the space bar to select
Enable or Disable.
6. Move the cursor to the Action field and press the space bar until Add
appears.
7. Press the Enter key. The new backup port entry appears in the backup port
configuration list.
Deleting a Backup Port Entry
To delete a backup port entry, follow these steps:
1. When the cursor at the Action field, press the - or + keys to highlight a
backup port entry.
2. Move the cursor to the Action field and press the space bar until Delete
appears.
3. Press the Enter key.
When you delete an entry, the backup port remains disabled. To enable the port,
see the section “Port Statistics” in this chapter.
Updating the State of a
Backup Port Entry
To update the state of a backup port entry, follow these steps:
1. Position the cursor in the Action field.
2. Press the - or + keys to highlight a backup port entry.
3. Move the cursor to the State entry field.
4. Press the space bar until the desired option (Disabled or Enabled) appears.