Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-12
Using the VT100 Interface
Writer:
Chris Seiter
Project:
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Comments:
299440-001
File Name:
2824_B.DOC
Last Saved On:
6/23/97 5:26 PM
Viewing Port Statistics
The Port Statistics screen displays statistics for specific ports on the hub.
Figure B- 5.
Port Statistics Screen
In addition to port statistics, the Port Statistics screen displays the following
information:
n
Port Speed — Shows the current wire speed of the port which includes
the following options:
o
No Link — No connection on this port
o
Auto: 100Mbps — The port has auto-negotiated to 100Mbps
o
Auto: 10Mbps — The port has auto-negotiated to 10Mbps
o
Fixed: 100Mbps — The port is a 100Mbps-only port, such as a
SUM port or a Netelligent 2524/2624 RJ-45 port, or the port is
administratively forced to 100Mbps
o
Fixed: 10Mbps — The port is forced, either administratively or via
a front-panel switch, to operate at 10Mbps
n
Port Link — This field has three possible settings: Partition (port is
auto-partitioned), Up (link is present), and Down (link is not present).