Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-10
Using the VT100 Interface
Writer:
Chris Seiter
Project:
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Comments:
299440-001
File Name:
2824_B.DOC
Last Saved On:
6/23/97 5:26 PM
Viewing the Management Agent
Configuration
The Management Agent Configuration screen displays information for the
hub’s Ethernet interfaces and serial interface. The screen consists of the
following update fields:
Interface Type The currently selected interface type. Possible values are
“Ethernet” and “Serial.”
Physical (MAC) Address The physical address of the current interface. This
field is blank for the serial interface.
Figure B- 4.
Management Agent Configuration Screen
The Management Agent Configuration screen lets you configure the following
information for each management agent group:
■
IP Address — Enter the IP address of the management agent.
■
IP Netmask — Enter the IP netmask of the management agent.
■
Gateway — Enter the IP gateway of the management agent.