Compaq 2824 Switch User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B-19
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Writer:
Chris Seiter
Project:
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Comments:
299440-001
File Name:
2824_B.DOC
Last Saved On:
6/23/97 5:26 PM
Downloading Firmware
The Download Firmware screen lets you download an updated version of
firmware. You can download Runtime only or a combination of Boot and
Runtime. If you access VT100 using a direct link, you can download firmware
via XMODEM or TFTP over Ethernet. If you access VT100 using Telnet, you
can download firmware via TFTP over Ethernet or TFTP over SLIP. Null
modem SLIP connections can only occur at 9600 baud. SLIP connections over
a remotely linked modem are available at 2400, 9600, and 19.2K baud.
Figure B- 9.
Download Firmware Screen
To download firmware, follow these steps:
1. Position the cursor on the Download Type field. Press the space bar to
select Runtime Only or Boot/Runtime.
2. Position the cursor on the Protocol type field. Press the space bar to
select the desired option (XMODEM, TFTP, and so forth).
3. Position the cursor on the Version field and enter the firmware version,
including any leading zeros (no periods). This information must be
correct for a successful download. You can find the version string in the
release notes that come with the firmware.