Filter
Top Products
Using the CD or DVD Drive
Users Guide 5–3
Ä
CAUTION: Before closing the disc tray, ensure that the disc snaps
onto the spindle in the center of the tray. You can damage the disc
and your notebook if the disc is not seated properly.
4. Push the tray back into the drive until the drive locks into
place.
Removing a Disc
To remove a disc from the drive,
complete the following steps:
1. Press the Eject button on the
drive.
2. Remove a disc from the tray, gently pushing down on the
center spindle while pulling up on the outer edges. Avoid
touching the surface of the disc.
3. Push the tray back into the drive until it locks into place.
Manually Ejecting a Disc
S
Did you know...
If your notebook power is off, you will not be
able to eject a disc from the CD or DVD drive. To remove a disc
without powering up your notebook, you must eject the disc from
the drive manually.
If you need to eject a disc when the power is off, complete the
following steps to eject the disc manually:
1. Make sure that the power is off and any external power
sources are disconnected.