Filter
Top Products
Installation Procedures
AlterPath BladeManager Manual 2-21
11. Tighten the captive screw on the rear of the server.
12. If you have other options to install, do so now.
13. Replace the cover. Go to Completing the Installation, this chapter.
Completing the Installation
To complete the installation, follow the steps below:
1. Re-install the cover.
2. Install the server in the rack cabinet.
Attention:
Install your server only in a rack cabinet with perforated doors.
Do not leave open space above or below an installed server in your rack
cabinet. To help prevent damage to server components, always install a
filler panel to cover the open space and to help ensure proper air
circulation. See the documentation that comes with your rack cabinet for
more information.
3. Connect the cables and power cords. See Connecting the Cables, this
section.
4. Update the server configuration. See Updating the Server Configuration,
this section.