Filter
Top Products
First Time Configuration Wizard
AlterPath BladeManager Manual 4-9
Any deviation from this standard may cause the web browser to disable
APBM cookies and prevent the user from logging into the E2000 web
application.
>> Connecting to the Web Interface
Now that the installation is complete, you can begin the configuration using
the web interface.
1. Type in the following URL from your web browser:
http://nnn.nnn.nnn.nnn
(Non-encrypted version)
- OR -
https://nnn.nnn.nnn.nnn
(Encrypted version)
Where: nnn.nnn.nnn.nnn is the IP address of either the first or second
Ethernet interface that you defined during the First Time Configuration.
2. When the Login screen appears, enter admin as the username and the
password (as specified in the First Time Configuration wizard).
The admin user is by default the manager of the BladeManager web interface
and runs the application in admin mode. This designation cannot be revoked.
Disabling HTTP to Use Only HTTPS
The BladeManager is configured to allow both HTTP and HTTPS access. You
can, however disable HTTP access by commenting out its configuration in the
BladeManager unit by using the command line.
Note: To configure the encrypted version, see “Disabling HTTP to Use Only
HTTPS” on page 5-16