Filter
Top Products
Maintenance |55
REPLACING THE IMAGING UNIT
When the life span of the imaging unit has expired, the Dell Toner
Management System™ program window appears on the computer,
indicating the imaging unit needs to be replaced. If the imaging unit is not
replaced, your printer fails to print.
1. Turn the printer off, then wait a few minutes for the printer to cool.
2. Using the handle, completely open the front cover.
3. Grasp the handles on the toner cartridge and pull to remove the four
cartridges from the printer.
4. Pull the waste toner container out of the printer using its handle.
5. Pull the imaging unit out of the printer using the groove on the front of
the imaging unit.
6. Take a new imaging unit out of its package. Remove the protective
devices on both sides of the imaging unit and the paper protecting the
surface of the imaging unit.
7. Holding the groove on the front of the imaging unit, push imaging unit
into the printer.
• Do not use sharp objects, such as a knife or scissors, to open the
imaging unit package. You could damage the surface of the
imaging unit.
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light for
more than a few minutes. Cover it with a piece of paper to protect
it if necessary.