Filter
Top Products
114 Update with your book title
6
Click
Apply Changes
.
The new source port is defined, and the device is updated.
Deleting a Copy Port from a Port Mirroring Session
1
Open the
Port Mirroring
page.
2
Select the
Remove
check box.
3
Click
Apply Changes
.
The selected port mirroring session is deleted, and the device is updated.
Configuring Address Tables
MAC addresses are stored in the Dynamic Address database. A packet addressed to a destination stored
in the database is forwarded immediately to the port. The Dynamic Address Table can be sorted by
interface, VLAN, and interface type. MAC addresses are dynamically learned as packets from sources
arrive at the device. Addresses are associated with ports by learning the ports from the frame’s source
address. Frames addressed to a destination MAC address that is not associated with any port are flooded
to all ports of the relevant VLAN. In order to prevent the bridging table from overflowing, dynamic MAC
addresses, from which no traffic is seen for a certain period, are erased. To open the Address Tables page,
click Switch→ Address Table in the tree view.
Viewing Dynamic Addresses
The Dynamic Address Table contains fields for querying information in the
dynamic address table,
including the interface type, MAC addresses, VLAN, and table sorting. Packets forwarded to an address
stored in the address table are forwarded directly to those ports.
The
Dynamic Address Table also contains information about the aging time before a dynamic MAC
address is erased, and includes parameters for querying and viewing the Dynamic Address list. The
Current Address Table contains dynamic address parameters by which packets are directly forwarded to
the ports.
To open the Dynamic Address Table, click Switch→ Address Table→ Dynamic Addresses Table in the
tree view.