Filter
Top Products
132 Update with your book title
Figure 7-24. VLAN LAG Setting
•
LAG
— The LAG number included in the VLAN.
•
PVID
— Assigns a VLAN ID to untagged packets. The possible field values are 1-4095. VLAN 4095 is
defined as per standard and industry practice, as the discard VLAN. Packets classified to this VLAN are
dropped.
•
Frame Type
— Packet type accepted by the LAG. Possible values are:
–
Admit Tag Only
— Only tagged packets are accepted by the LAG.
–
Admit All
— Tagged and untagged packets are both accepted by the LAG.
•
Ingress Filtering
— Enables or disables Ingress filtering by the LAG. Ingress filtering discards packets
that are destined to VLANs of which the specific LAG is not a member.
Assigning VLAN LAG Settings:
1
Open the
VLAN LAG Setting
page.
2
Select a LAG from the
LAG
drop-down menu and complete the fields on the page.
3
Click
Apply Changes
.
The VLAN LAG parameters are defined, and the device is updated.
Displaying the VLAN LAG Table
1
Open the
VLAN LAG Setting
page.
2
Click
Show All
.
The
VLAN LAG Table
opens.