Filter
Top Products
98 Update with your book title
– Authenticated ports remain unauthenticated VLAN and Guest VLAN members. Static VLAN
configuration is not applied to the port.
– The following list of VLANs cannot participate in DVA: an Unauthenticated VLAN, a Dynamic
VLAN that was created by GVRP, a Voice VLAN, a Default VLAN and a Guest VLAN.
– Network administrators can delete the supplicant VLAN while the supplicant is logged in. The
supplicant is authorized during the next re-authentication if this supplicant VLAN is re-created or
a new VLAN is configured on the RADIUS server.
•
Guest VLAN
— Specifies whether the Guest VLAN is enabled on the interface.
•
Periodic Reauthentication
— Reauthenticates the selected port periodically, when enabled. The
reauthentication period is defined in the
Reauthentication Period (300-4294967295)
field.
•
Reauthentication Period (300-4294967295)
— Indicate the time span in which the selected port is
reauthenticated. The field value is in seconds. The field default is 3600 seconds.
•
Reauthenticate Now
— Permits immediate port reauthentication, when selected.
•
Authentication Server Timeout (1-65535)
— Defines the amount of time that lapses before the
device resends a request to the authentication server. The field value is in seconds. The field default is
30 seconds.
•
Resending EAP Identity Request (30-65535)
— Defines the amount of time that lapses before EAP
request are resent. The field default is 30 seconds.
•
Quiet Period (0-65535)
— The number of seconds that the device remains in the quiet state following
a failed authentication exchange. The possible field range is 0-65535. The field default is 60 seconds.
•
Supplicant Timeout (1-65535)
— The amount of time that lapses before EAP requests are resent to
the user. The field value is in seconds. The field default is 30 seconds.
•
Max EAP Requests (1-10)
— The total amount of EAP requests sent. If a response is not received after
the defined period, the authentication process is restarted. The field default is 2 retries.
Displaying the Port Based Authentication Table
1
Display the
Port Based Authentication
page.
2
Click
Show All
.
The
Port Based Authentication Table
opens: