Filter
Top Products
170 Dell PowerConnect 28xx Systems User Guide
show tech-support [config] [memory]
Syntax Description
•
memory
— (Optional) Displays memory and processor state data.
•
config
— (Optional) Displays switch configuration within the CLI commands supported on the
device.
Defaults
By default, this command displays the output for technical-support-related show commands. Use
keywords to specify the type of information to be displayed. If you do not specify any parameters, the
system displays all configuration and memory data.
Command Modes
EXEC
Usage Guidelines
NOTE: Avoid running multiple show tech-support commands on a switch or multiple switches on the network segment.
Doing so may cause starvation of some time sensitive protocols, like STP.
The show tech-support command output is continuous; it does not display one screen at a time. To
interrupt the output, press Esc.
If you specify the config keyword, the show tech-support command displays the output:
show clock
show system
show version
show system mode
show ip interface
show interfaces configuration
show interfaces status
show interfaces port-channel
show vlan
show interfaces switchport
show spanning tree
show bridge multicast address-table
show ip igmp snooping groups
show dot1x
show dot1x users