Filter
Top Products
Update with your book title 67
Displaying Virtual Cable Test Results Table
1
Open the
Integrated Cable Test for Copper Cables
page.
2
Click
Show All
.
The
Virtual Cable Test Results Table
opens.
Viewing Optical Transceiver Diagnostics
The Optical Transceiver Diagnostics page contains fields for performing tests on Fiber Optic cables.
Optical transceiver diagnostics can be performed only when the link is present. To open the Optical
Transceiver Diagnostics page, click System→ Diagnostics→ Optical Transceiver Diagnostics in the tree
view.
Figure 6-8. Optical Transceiver Diagnostics
•
Port
— The port to which the fiber cable is connected.
•
Temperature
— The temperature (in Celsius) at which the cable is operating.
•
Voltage
— The voltage at which the cable is operating.
•
Current
— The current at which the cable is operating.
•
Output Power
— The rate at which the output power is transmitted.
•
Input Power
— The rate at which the input power is transmitted.
•
Transmitter Fault
— Indicates if a fault occurred during transmission.