Filter
Top Products
Update with your book title 63
Entering Secure Mode
The Secure Mode
page allows you to put the device in the
Secure
management mode. Once enabled, it
prevents users from making any further configuration changes to the switch. This is done by removing
the IP address of the switch so that it becomes inaccessible. In Secure Mode the switch retains
configuration through power cycles just like in Managed Mode.
To use Secure Mode, configure the device in Managed Mode, and then switch to Secure Mode via the
web interface. To exit Secure Mode, press the Managed Mode button on the device to enter the
Managed Mode default configuration with the default IP address of 192.168.2.1. For information about
management modes, see "Management Modes" on page 49. For information about saving Configuration
files, see "Managing Files" on page 80
.
To open the Secure Mode
page
,
click System → General → Secure Mode in the tree view.
Figure 6-5. Secure Mode
Entering Secure Mode
1
Open the
Secure Mode
page.
2
Click
Secure
.
A confirmation message displays.
3
Click
OK
.
The device enters Secure mode.