Filter
Top Products
144 Configuring System Information
www.dell.com | support.dell.com
Configuring DNS Servers Using the CLI Commands
The following table summarizes the CLI commands for configuring device system information.
The following is an example of the CLI commands:
Table 6-33. DNS Server CLI Commands
CLI Command Description
ip name-server
server-address
Sets the available name servers. Up to eight name
servers can be set.
no ip name-server
server-
address
Removes a name server.
ip domain-name
name
Defines a default domain name that the software
uses to complete unqualified host names.
clear host {
name
| *}
Deletes entries from the host name-to-address
cache.
show hosts [
name
]
Displays the default domain name, list of name
server hosts, the static and the cached list of host
names and addresses.
ip domain-lookup
Enables DNS system for translating host names to
IP addresses.
console(config)# ip name-server 176.16.1.18