Filter
Top Products
Configuring System Information 99
Figure 6-4. System Health
The
System Health
page contains the following fields:
Unit No.
— Indicates the unit number for which the device asset information is displayed.
Power Supply Status
— The device has two power supplies. Power supply 1 is displayed as PS1 in
the interface, while the redundant power supply is displayed as RPS. The possible field values are:
— The power supply is operating normally.
— The power supply is not operating normally.
Not Present
— The power supply is currently not present.
Fan Status
— The non-PoE devices have two fans, while the PoE devices have five fans. Each fan is
denoted as fan plus the fan number in the interface. The possible field values are:
— The fan is operating normally.
— The fan is not operating normally.
Not Present
— A fan is currently not present.
Temperature
— The temperature at which the device is currently running. The device temperature
is displayed in Celsius. The device temperature threshold is 0-40 C (32-104F). The following table
displays the temperature in Fahrenheit in increments of 5.