Filter
Top Products
Configuring Switch Information 305
Defining VLAN Ports Settings
The
VLAN Port Settings
page
contains fields for managing ports that are part of a VLAN. The port
default VLAN ID (PVID) is configured on the
VLAN Port Settings
page. All untagged packets
arriving to the device are tagged by the ports PVID.
To open the
VLAN Port Settings
page, click
Switch
→
VLAN
→
Port Settings
in the tree view.
Figure 7-31. VLAN Port Settings
The
VLAN Port Settings
page
contains the following fields:
Port
— The port number included in the VLAN.
Port VLAN Mode
— The port mode. Possible values are:
General
— The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged
(full 802.1Q mode).
Access
— The port belongs to a single untagged VLAN. When a port is in Access mode, the
packet types which are accepted on the port cannot be designated. Ingress filtering cannot be
enabled/disabled on an access port.
Trunk
— The port belongs to VLANs in which all ports are tagged (except for one port that
can be untagged).
PVE Promiscuous
— The port is part of a PVE Promiscuous VLAN.
PV
E
Community
— The port is part of a PVE Community VLAN.
PV
E
Isolated
— The port is part of a PVE Isolated VLAN.