Filter
Top Products
290 Configuring Switch Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
Table 7-77. RSTP Settings CLI Command
CLI Command Description
spanning-tree link-type
{point-to-point |
shared}
Overrides the default link-type setting.
spanning tree mode {stp |
rstp | mstp}
Configure the spanning tree protocol currently
running.
clear spanning-tree
detected-protocols
[ethernet
interface
|
port-channel
port-
channel-numbe
r]
Restarts the protocol migration process.
show spanning-tree
[ethernet
interface
|
port-channel
port-
channel-number
]
Displays spanning tree configuration.
console(config)# interface ethernet 1/e5
console(config-if)# spanning-tree link-type shared
console(config-if)#
spanning tree mode rstp