256 Configuring Switch Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
console(config)# interface port-channel 2
console(config-if)# no negotiation
console(config-if)# speed 100
console(config-if)# flowcontrol on
console(config-if)# exit
console(config)# interface port-channel 3
console(config-if)# shutdown
console(config-if)# exit
console(config)# interface port-channel 4
console(config-if)# back-pressure
console(config-if)# description p4
console(config-if)# end
console# show interfaces port-channel
Channel Ports
--------- ---------
ch1 Inactive: 1/e(11-13)
ch2 Active: 1/e14