Filter
Top Products
320 Configuring Switch Information
www.dell.com | support.dell.com
Defining LACP Parameters
The
LACP Parameters
page contains fields for configuring LACP LAGs. Aggregate ports can be
linked into link-aggregation port-groups. Each group is comprised of ports with the same speed.
Aggregated Links can be manually setup or automatically established by enabling Link Aggregation
Control Protocol (LACP) on the relevant links. To open the
LACP Parameters
page, click
Switch
→
Link Aggregation
→
LACP Parameters
in the tree view.
Figure 7-38. LACP Parameters
The
LACP Parameters
page contains the following fields:
LACP System Priority
(1-65535)
— The LACP priority value for global settings. The possible
range is 1- 65535. The default value is 1.
Select a Port
— The port number to which timeout and priority values are assigned.
LACP Port Priority (1-65535)
— LACP priority value for the port.
LACP Timeout
— Administrative LACP timeout. The possible field values are:
Short
— Specifies a short timeout value.
Long
— Specifies a long timeout value.