Filter
Top Products
Configuring Switch Information 243
Assigning MAC based ACEs to ACLs Using the CLI Commands
The following table summarizes the equivalent CLI commands for assigning MAC based ACEs to
ACLs, as displayed in the
MAC Based ACL
page.
Table 7-65. MAC-Based ACE CLI Commands
CLI Command Description
mac access-list name
Creates Layer 2 MAC ACLs, and enters to MAC-Access
list configuration mode.
deny
destination
Denies traffic if the conditions defined in the MAC based
ACL are matched.
show access-lists [
name
]
Displays Access Control Lists configured on the device.