Filter
Top Products
306 Configuring Switch Information
www.dell.com | support.dell.com
Dynamic
— Assigns a port to a VLAN based on the host source MAC address connected to
the port.
PVID
— Assigns a VLAN ID to untagged packets. The possible values are 1-4095. VLAN 4095 is
defined as per standard and industry practice as the Discard VLAN. Packets classified to the
Discard VLAN are dropped.
Frame Type
— Packet type accepted on the port. Possible values are:
Admit Tag Only
— Only tagged packets are accepted on the port.
Admit All
— Both tagged and untagged packets are accepted on the port.
Ingress Filtering
— Enables or disables Ingress filtering on the port. Ingress filtering discards
packets that are destined to VLANs of which the specific port is not a member.
Current Reserved VLAN
— The VLAN currently designated by the system as the reserved VLAN.
Reserve VLAN for Internal Use
— The VLAN selected by the user to be the reserved VLAN if not
in use by the system.
Assigning Port Settings
1
Open the
VLAN Port Settings
page.
2
Select the port to which settings need to be assigned from the
Port
drop-down menu.
3
Complete the remaining fields on the page
4
Click
Apply Changes
.
The VLAN port settings are defined, and the device is updated.
Displaying the VLAN Port Table
1
Open the
VLAN Port Settings
page.
2
Click
Show All.
The
VLAN Port Table
opens.