Filter
Top Products
92 Adding Parts
www.jp.dell.com | support.jp.dell.com
11 Reinstall the video card (see page 88).
12 Close the computer cover (see page 92).
13 Attach the computer stand (see page 21).
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.
14
Connect your computer and devices to electrical outlets, and turn
them on.
15 Right-click the My Computer icon and then click Properties.
16 Click the General tab.
17 To verify that the memory is installed correctly, check the amount of
memory (RAM) listed.
Closing the Computer Cover
1 Ensure that all cables are connected, and fold cables out of the way.
Make sure that cables are not routed over the drive cage—they will
prevent the cover from closing properly.
2 Ensure that no tools or extra parts are left inside the computer.
3 Pivot the cover down and ensure that the release buttons click into
place.
4 Attach the computer stand (see page 21).
NOTICE: To connect a network cable, first plug the cable into the network
wall jack and then plug it into the computer.