Filter
Top Products
54 Using Batteries and Module Bay Devices
www.dell.com | support.dell.com
3 Insert the new device into the bay, push the device until you feel a click, and push the
device latch release in so that it is flush with the computer.
If the Device Screw Is Installed
1 Save and close any open files, exit any open programs, and then shut down the
computer.
2 If the computer is connected to a docking device (docked), undock it. See the
documentation that came with your docking device for instructions.
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not
installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
3
Close the display and turn the computer over.
4 Use a #1 Phillips screwdriver to remove the device screw from the bottom of the
computer.
5 Press the device latch release so that the latch release pops out.
device latch release
3Y647bk0.book Page 54 Wednesday, April 2, 2003 3:24 PM