Filter
Top Products
58 Using Batteries and Module Bay Devices
www.dell.com | support.dell.com
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not
installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
4
Use a #1 Phillips screwdriver to remove the device screw from the bottom of the
computer.
5 Press the device latch release so that the latch release pops out.
6 Pull the device by the latch release to remove the device from the module bay.
7 Insert the new device into the bay, push the device until you feel a click, and push the
device latch release in so that it is flush with the computer. Windows XP automatically
recognizes the new device.
8 If necessary, enter your password to unlock your computer.
device latch release
3Y647bk0.book Page 58 Wednesday, April 2, 2003 3:24 PM