Filter
Top Products
134 Dell Converged Enhanced Ethernet Administrator’s Guide
53-1002116-01
Managing and displaying the FCoE login configuration
16
Perform one of the following tasks to toggle the availability of FCoE login configuration
management.
Displaying or aborting the current
configuration transaction
NOTE
The configuration changes created using the fcoelogingroup command are kept in a transaction
buffer until you save the buffer using the fabric-wide fcoelogincfg--save command. The login
configuration is saved as a transaction and to apply it you need to specifically save it.
Perform one of the following tasks to either display or abort the current configuration transaction.
Cleaning up login groups and VN_port mappings
To cleanup login groups and VN_port mappings, perform the following tasks.
Task Command
Enable the FCoE login configuration management
on the switch (this is a switch-based command,
not port-based).
switch:admin> fcoelogincfg --enable
Disable the FCoE login configuration
management on the switch.
switch:admin> fcoelogincfg --disable
Task Command
Display the current configuration transaction. switch:admin> fcoelogincfg --transshow
Abort the current configuration transaction. switch:admin> fcoelogincfg --transabort
Task Command
Perform a cleanup of all conflicting login groups
and VN_port mappings from the effective
configuration. This purges not only the conflicting
login groups but also the non-existing switches.
switch:admin> fcoelogincfg --purge
Perform a cleanup of all conflicting login groups
and conflicting VN_port mappings from the
effective configuration.
switch:admin> fcoelogincfg --purge -conflicting
Perform a cleanup of all login groups for
non-existing switches from the effective
configuration.
switch:admin> fcoelogincfg --purge -nonexisting