Filter
Top Products
Dell Converged Enhanced Ethernet Administrator’s Guide 17
53-1002116-01
CEE Command Line Interface
2
NOTE
Pressing Ctrl+Z or entering the end command in any mode returns you to Privileged EXEC mode.
Entering exit in any mode returns you to the previous mode.
CEE CLI keyboard shortcuts
Table 4 lists CEE CLI keyboard shortcuts.
NOTE
In EXEC and Privileged EXEC modes, use the show history command to list the commands most
recently entered. The switch retains the history of the last 1000 commands entered from all
terminals.
Feature
configuration
CEE map:
switch(config-ceemap)#
Standard ACL:
switch(conf-macl-std)#
Extended ACL:
switch(conf-macl-ext)#
From the global configuration mode,
specify a CEE feature by entering
one of the following feature names:
• cee-map
• mac access-list
Access and configure
CEE features.
Console and
VTY (line)
configuration
switch(config-line)# From the global configuration mode,
configure a terminal connected
through the console port by entering
the line console command.
Configure a terminal connected
through a Telnet session by entering
the line vty command.
Configure a terminal
connected through the
console port or a
terminal connected
through a Telnet
session.
TABLE 4 CEE CLI keyboard shortcuts
Keystroke Description
Ctrl+B or the left arrow key. Moves the cursor back one character.
Ctrl+F or the right arrow key. Moves the cursor forward one character.
Ctrl+A Moves the cursor to the beginning of the command line.
Ctrl+E Moves the cursor to the end of the command line.
Esc B Moves the cursor back one word.
Esc F Moves the cursor forward one word.
Ctrl+Z Returns to Privileged EXEC mode.
Ctrl+P or the up arrow key. Displays commands in the history buffer with the most recent command
displayed first.
Ctrl+N or the down arrow key. Displays commands in the history buffer with the most recent command
displayed last.
TABLE 3 CEE CLI command modes
Command
mode
Prompt How to access the command mode Description