Filter
Top Products
Installing System Components | 111
5 Replace the screws that secure the middle plane holder to the chassis.
See
Figure 3-27.
6 Place the mid-plane holder support into the chassis. See Figure 3-26.
7 Replace the screws that secure the mid-plane holder support to the
chassis. See Figure 3-26.
8 Place the upper middle plane on the middle plane holder. See Figure 3-
25.
9 Replace the screws that secure the middle plane to the middle plane
holder. Figure 3-25.
10 Connect all the cables to the upper middle plane. See Figure 5-9.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
11 Place the fan bracket into the chassis. Figure 3-24.
12 Replace the screws that secure the fan bracket to the chassis. Figure 3-
24.
13 Replace the cooling fans. See "Installing a Cooling Fan" on page 100.
14 Replace the system-board assemblies. See "Installing a System-Board
Assembly" on page 69.
15 Close the system, see "Closing the System" on page 98.
16 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.